National Equipment Helix Grinder Replacement Parts
Use the manual to help search for your part number, or click on the subcategory you need to shop below.
Browse machine subcategories
National Equipment Helix Planetary Grinder
View Machine
Helix Labels6 parts
Helix 230V Control Panel16 parts
Helix 110V/120V Control Panel17 parts
Helix Alternate Handle Assembly4 parts
Helix Upper Handle Assembly25 parts
Helix Lower Handle Assembly16 parts
Helix Motor Assembly & Parts13 parts
Helix Skirt Assembly16 parts
Helix Grinder Base Assembly10 parts
Helix 402757 Tooling Assembly16 parts
No image
Manuals & parts diagrams
Specs & maintenance scheduleManuals & documents
Parts diagrams (403223 Rev J)
- Overall Machine p. 22
- Base Assembly p. 23
- 402757 Tooling Assembly p. 24
- 403231 Skirt Assembly p. 25
- Motor p. 26
- Lower Handle Assembly p. 27
- Upper Handle Assembly p. 28
- Handle Assembly (Helix-11XXXX Only) p. 29
- Control Panel - 110V/120V p. 30
- Control Panel - 230V p. 31
- Labels p. 32
- Wiring diagrams p. 33
Maintenance guides for this machine
How-to and troubleshooting from the PreFloor Knowledge Center.
-
Dust Extraction: Matching a HEPA Vacuum to Your Grinder
Sizing a dust collector to a grinder under OSHA Table 1, what HEPA and filter cleaning mean in practice, and the setup mistakes that kill airflow.
-
Grind, Shot Blast or Scarify? Choosing a Prep Method
Diamond grinding, shot blasting and scarifying compared: the surface profile each produces, what each removes, and how to pick one for the job.
-
Diamond Tooling: Bond Hardness and Grit Selection
How to match diamond bond hardness to the slab, which grit does what, when to use PCD instead, and how to tell your tooling is wrong.
-
Metal Bond, Resin Bond and PCD Tooling Compared
What metal bond, hybrid, resin bond and PCD tooling each do, where one hands off to the next, and why PCD is a removal tool only.
-
Grinding Off Thinset, Mastic and Glue Residue
Getting thinset, mastic and glue residue off concrete: testing first, choosing between PCD, metal bonds and floor-machine attachments, and handling the dust.
-
Edge Grinding Along Walls and Columns
Grinding the last inches along walls and columns with a shrouded hand grinder or a planetary's edge mode, matching the field, and OSHA Table 1 for handheld g...
-
Polishing Concrete: Grit Sequence and Densifier
The grind-hone-polish sequence, when and how to apply densifier, lithium vs sodium silicate, gloss targets, and dust and slurry rules for polished concrete.
Compare Products
| Price |
|---|
| SKU |
| Rating |
| Discount |
| Vendor |
| Tags |
| Weight |
| Stock |
| Short Description |
Compare Products
Need help?
- Heading
- Heading
Description here