My shopping cart
Your cart is currently empty.
Continue ShoppingNational Equipment Helix PLANETARY GRINDER
- $5,488.42
National Equipment Helix PLANETARY GRINDER
- $5,488.42
Finance for as low as $200 per month!
Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings.
This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency.
-
Fully adjustable handle accommodates a range of operating positions
-
Quick-release levers allow the machine to be separated into two pieces for easy transport
-
Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
-
Removable weights give the operator freedom to increase or decrease head pressure when grinding 16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
-
LED light illuminates the surface directly behind the machine
-
Dual-speed motor increases the versatility of this machine; operating at high or low speed
Pads
Click to add:
Specifications
Width: 17.5"
Disk Size: 16"
Max Height: 47.6"
Min Height: 29.4"
Max Length: 47"
Min Length: 27.9"
Weight: 206 lb
Grinding Pressure: 128 lb
Drum RPM: High/Low Speed: 304/171 (120V/60Hz)
High/Low Speed: 291/164 (230V/50Hz)
Motor RPM: High/Low Speed: 3339/1871 (120V/60Hz)
High/Low Speed: 3200/1800 (230V/50Hz)
Motor Phase: Single
HP: 1.5
Amps: 120V / 60Hz / 12 amps
Safety
- Quick-release levers allow machine to be separated into 2 pieces for easy transport
- LED light illuminates the surface directly behind the machine
- Fully adjustable handle accommondates a range of operating positions
Performance
- Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
- Removable weights give the operator freedom to increase or decrease head pressure when grinding 16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
- 16-inch grinding plate incorporates a floating tool assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
- Dual-speed motor increases the versatility of this machine; operating at high or low speed
- Vendor: National Flooring Equipment