Eddy Floor Tools Polisher 2000 Replacement Parts

67 products

OEM replacement parts for the Eddy Orbital Polisher 2000 (EDVS-2000). Find the motor, vibrating plate, rubber shocks, handle and hardware parts needed to keep your machine gliding without vibration or pull.

Machine Reference

Model	EDVS-2000 Floor Sander & Polisher
Plate size	18" length × 16" width
No-load speed	3450 RPM
Net weight	99 lbs (without handle)
Power	120 V or 230 V, 12 A, 50 Hz or 60 Hz
Pad / paper	12" × 18" rubber carpet; pads may be used wet or dry

Parts by Assembly

Motor & Electrical	Electric motor (3450 RPM, 120 V or 230 V), male connector, male and female plugs, switch, wire protectors and drive key.
Vibrating Plate System	Vibrating plate and assembly, rubber shocks, bearings, bearing rubber cup, rubber bushings, shock and cup supports, counterweight and rubber carpet.
Housing & Main Plate	Cast-iron main plate, octagonal cover, ventilation cover and cover handle.
Wheels & Handle	Wheels and shafts, handle shaft, brackets, lock handle, nut stopper and handle hardware.
Hardware	Cap nuts, steel and support washers, bolts, socket-head cap screws and set screws.

Sanding & Polishing Guide

Sanding sequence	1st pass 36 grit, 2nd pass 50–60 grit, final pass 120 grit
Polishing pads	Black: stripping. Green: general-purpose cleaning. Blue: light-duty cleaning. Red: polish spray buff. White: high-gloss polish.
Sanding requirement	The white polishing (fiber) pad is required at all times while sanding.
Maintenance note	Never change the bolt length on the rubber shocks and do not use shims or bushings above or below them. Verify the rubber shocks (#907) and bearing rubber cup (#911) periodically. If the machine vibrates or pulls in any direction, first check that the pad is properly seated on the vibrating plate.

Documentation

EDVS-2000 Instruction Manual (PDF)

Available through PreFloorTools.com. Browse the parts below or search by part number. Can't find the part you need? Contact PreFloorTools with your machine model and the factory part number and we'll track it down. Also see: Eddy Floor Scraper parts, Eddy Tile Breaker TB3 parts, Eddy Orbital Sander 3000 (EDVS-3000) parts.