Some products may take 2-4 weeks to ship.
National Flooring Equipment
National Spartan 220 Scarifier is an 8″ electric scarifier for milling, cleaning and profiling concrete, and for removing coatings, thin-set, paint and high spots. It runs on 230 V single-phase power and ships with a complete 402165 carbide cutter drum.
| Manufacturer Part # | 99200 |
| Brand | National Flooring Equipment |
| Milling Width | 8″ |
| Motor | 2.99 HP, 230 V, single phase, 60 Hz, 3,440 RPM |
| Weight | About 126 lb |
| Dimensions | 14.5″ W × 35.4″ L × 41″ H |
| Includes | 402165 complete drum with HMT carbide cutters |
Sold by the full carton only. This product must be purchased in increments of 1 pieces.
Default Title
PreFloorTools.com
Pickup available,usually ready in 2 hours
3414 Merchant Court
WILMINGTON NC 28405
United States
How-to, setup and maintenance from the PreFloor Knowledge Center.
Diamond grinding, shot blasting and scarifying compared: the surface profile each produces, what each removes, and how to pick one for the job.
How scarifiers work, which cutters to use for coatings, leveling and general prep, setting depth on National's Spartans, and the CSP, silica and noise rules.
Choosing between PCD grinding, scarifying and shot blasting to remove epoxy and other coatings, based on thickness and what goes down next.
What ICRI concrete surface profiles (CSP 1 to 10) are, which prep methods reach which profile, and how to check yours against the chips.
| Price |
|---|
| SKU |
| Rating |
| Discount |
| Vendor |
| Tags |
| Weight |
| Stock |
| Short Description |
Description here
Description here