Mannington MR-710 Premium Urethane Sports Flooring Adhesive

Mannington

Mannington MR-710 Premium Urethane Sports Flooring Adhesive

$115.60

Mannington MR-710 Premium Urethane Sports Flooring Adhesive – 2 & 4 Gallon Pails

Mannington MR-710 is a single-component, premium urethane adhesive formulated for installing Mannington Commercial Reset Recycled Rubber Sports Flooring in both tile and sheet formats. This ready-to-use, solvent-free adhesive delivers a strong, durable bond capable of handling the demands of athletic, fitness, and multipurpose commercial environments.

Installers appreciate MR-710 for its smooth trowelability, consistent working time, and dependable performance over properly prepared substrates. With a working time of 30–60 minutes depending on temperature and humidity, the adhesive provides flexibility on the jobsite while maintaining the bond strength required for heavy foot traffic and equipment loads.

  • ✔️ Premium urethane adhesive for Reset rubber sports flooring (tile & sheet)
  • ✔️ Single-component formula; no mixing needed
  • ✔️ Low VOC, solvent-free, and non-flammable
  • ✔️ Freeze–thaw stable for reliable storage
  • ✔️ 30–60 minute working time depending on jobsite conditions
  • ✔️ Suitable for use over clean, dry, structurally sound substrates
  • ✔️ Available in 2-gallon and 4-gallon pails

Coverage:
✔️ Approx. 95 sq. ft. per gallon when applied with a 1/16" × 1/16" × 1/16" square-notch trowel Coverage per gallon is identical regardless of pail size.

Surface Preparation:
Substrates must be structurally sound, smooth, level, clean, and free of contaminants including dust, grease, paint, curing compounds, release agents, or old adhesive residues. Maintain temperature between 65°–85°F and relative humidity between 30%–60% for 48 hours before, during, and after installation.

Concrete moisture limits:
✔️ ≤ 8 lbs / 1000 sq. ft / 24 hours (ASTM F1869) ✔️ ≤ 90% RH (ASTM F2170) — qualifying standard if both tests are run MR-710 is not suitable for substrates with moisture intrusion, hydrostatic pressure, or slabs lacking a proper vapor retarder.

Installation Notes:
Apply adhesive with the recommended trowel at a 45° angle. Verify adhesive transfer by lifting flooring periodically. Protect areas from light traffic for 12 hours and heavy traffic for 24 hours.

Cleanup: Remove fresh adhesive immediately with a white cloth and mineral spirits. Once cured, MR-710 is extremely difficult to remove.

Packaging & Ordering:
✔️ 2-Gallon Pail — SKU: R710G2
✔️ 4-Gallon Pail — SKU: R710G4
Each variant includes the same adhesive formula, performance characteristics, and application requirements.

MR-710 is manufactured to strict quality control standards and carries a one-year shelf life when stored unopened in a climate-controlled space between 50°–90°F.

Quantity
Packaging: