The DL3000 is National's 230 V single-phase dust collector with a 3.15" inlet, a HEPA filter and an endless bagging system. National lists it as compatible with the A95 and A96 shot blasters, the 8274-4 and Helix grinders and the 110-8 scarifier.
Specifications
Specs from National's DL3000 product page and the operating manual (402540 Rev F). Where the two differ, both are shown.
| Spec | Value |
|---|---|
| Dimensions | 24.4" x 63" x 24.4" (manual); 25.6" W x 63" H x 31" L (product page) |
| Weight | 179.7 lb / 81.5 kg (manual); 154.3 lb / 70 kg (product page) |
| Electrical | 230 V single phase, 50-60 Hz; 4.6 hp (3.45 kW), 15 A (manual) |
| Air movement | 318 CFM; 540 m³/h (manual); 600 m³/h (product page) |
| Vacuum pressure | 98.4" H2O |
| Filter | Polyester M (manual); 32.3 sq ft, 99.995% at 0.14 microns (product page) |
| Noise | 76 dBA (manual); 75 dBA (product page) |
| Inlet | 3.15" (80 mm) |
Maintenance schedule
From National's DL3000 operating manual (402540 Rev F).
| Interval | What to do |
|---|---|
| Before each use | Operate the filter shaking system; also after long operation |
| Every 800 hours | Replace motor brushes |
Videos from National
National's general dust collector videos.
Sources
Everything on this page comes from National Flooring Equipment's own published material.
