National Equipment · Ride-on scrapers

National 5625 Propane Ride-On Scraper

Manuals, parts diagrams, maintenance schedule and specs

The National 5625 is a propane-powered ride-on floor scraper with a 25 HP engine. National lists it for commercial and industrial floor removal. This page covers the 5625 and the 5625DL, whose dual-lift front end lets the operator adjust blade angle and pitch without leaving the seat; one manual (401823 Rev N) covers both.

Specifications

Figures from National's product page and operating manual. Where the two disagree, both are shown with the manual first.

Spec Value
Power Propane; 25 HP (18.6 kW), 2,950 RPM (manual)
Width 26" (66 cm)
Height 51" (129.5 cm)
Length 5625: 58" (147 cm); 5625DL: 63" (160 cm)
Weight Weighted 1,915 lb manual lift / 2,015 lb dual lift (manual); 5625: 1,822 lb (826.4 kg); 5625DL: 1,968 lb (892.7 kg) (product page)
Machine only 1,413 lb manual lift / 1,513 lb dual lift (manual); 5625: 1,377 lb (624.6 kg); 5625DL: 1,513 lb (686.3 kg) (product page)
Removable weight 5625: 370 lb front / 75 lb rear; 5625DL: 455 lb front
Speed Up to 200 ft/min (61 m/min)
Hydraulic tank 6 gallons (22.7 L) (manual)

Maintenance schedule

From National's 5625 / 5625DL operating and service manual (401823 Rev N), page 22. For full engine service, the manual refers you to the Kawasaki engine manual.

Interval What to do
Daily Check all machine components for build-up and clean if needed; inspect all safety devices; inspect hoses and fittings for leaks; check engine oil level
First 8 hrs, then every 50 hrs Change engine oil; clean air cleaner foam and paper elements
Every 100 hrs Clean and regap spark plug
After first 100 hrs, then every 200 hrs Check hydraulic oil level; replace spin-on hydraulic oil filter
Every 200 hrs Inspect radiator; check fan belt condition and tension
Every 300 hrs Replace air cleaner paper element
Every 400 hrs Change coolant
After first 500 hrs, then every 1,000 hrs Change hydraulic fluid
Every 1,000 hrs Grease front caster wheel

Fluids and lubricants

What National specifies for this machine.

  • Hydraulic oil: Texaco Rando 46 or a compatible ISO or AW #46 fluid from a brand-name manufacturer. Tank holds 6 gallons (22.7 L) total; plan on 5.5 gallons (20.8 L) at an oil change because some oil stays in the system.
  • Engine oil: 5W-30, part 402377; oil filter 400235; air filter element 400218 (manual parts list). See the Kawasaki engine manual for details.

Videos from National

Walkthroughs and how-to videos National has published for this machine, plus a few general ones that apply to it.

Sources

Everything on this page comes from these National Flooring Equipment pages and documents.

Shop parts

National 5625 Scraper Parts

Maintenance and how-to guides

The machine