National Equipment · Carpet pullers

National 72 High-Powered Carpet Puller

Manuals, parts diagrams, maintenance schedule and specs

Manuals & documents

PreFloor-hosted copies of the manufacturer's documents. Check the manufacturer for newer revisions.

Parts diagrams

Exploded views and part numbers from the operating manual (403289 Rev C), pages 14–21. Each link opens the manual at that page.

The National 72 is the high-powered version of National's 71 powered carpet puller. It uses the same frame size, pull bar and #71-P33 rope as the 71, with a 1.5 HP electric motor and a pull speed of up to 30 ft/min. It is built for one-person operation on direct glued-down carpet.

Specifications

Specs from the 72 operating manual (403289 Rev C) and National's 2026 catalog. National's 72 product page could not be loaded when this page was built.

Spec Value
Width 29.5" (75 cm)
Length 34" (86 cm)
Height 42" (107 cm) with screen; 10" (25 cm) with screen folded
Weight 190 lb (86.2 kg)
Pull speed Up to 30 ft/min (up to 9.1 m/min)
Motor 1.5 HP (1.1 kW), 1,740 RPM
Voltage 110 (manual); 115/230, 60 Hz only (catalog)
Pull rope National #71-P33 replacement rope only; never use cable

Maintenance schedule

From National's 72 operating manual (403289 Rev C).

Interval What to do
Before each use Protective screens and rope guard in place; check pull bar welds and clamps; check pulley wheel, housing, hook and pin for loose or damaged parts; check rope for cuts or fraying (replace with #71-P33, no knots); keep gripper strip pins clean (stiff wire brush, in the direction of the pin angle); check wiring and that switches return to off
120 hours (new reducer) First gear reducer oil change (based on 8 hours per day operation)
Every 2,000 hours or every six months Change gear reducer oil
Once per year Check gearbox oil level; top up with Mobil SHC 634 if needed
As needed Inspect cords, rope, switches and guards; grease the drive shaft and pillow block bearing; check the pulley; clean the pull bar; keep gripper strips clean and cover them during transport

Fluids and lubricants

Lubricants National specifies in the 72 manual.

  • Gearbox / gear reducer: Mobil SHC 634 or a similar synthetic gear oil, ISO viscosity grade 460 (National stock #1450-40, 1 quart)

Sources

Everything on this page comes from National Flooring Equipment's own published material.

Shop parts

National Equipment 72 Carpet Puller Replacement Parts

Maintenance and how-to guides

The machine