The Gundlach 1000SR Wet Tile Saw features a 1.5 horsepower motor for maximum power and durability. 24" straight cuts, 18" diagonal cuts.
These professional 10" tile saws are designed to give the best possible cuts and productivity on tile and stone.
24" Straight Cut & 18" Diagonal Cut
A large cutting table mounted on ball bearing rollers with an injection molded rubber top to reduce vibration and securely hold tile in place for accurate cuts
A rubber topped cutting table with slots molded on a 45° angle to act as diagonal cutting guides and also channel water back to the tray
The last 1” of the rubber top molded solid up to the tile backstop to eliminate end-of-cut corner breaking caused by insufficient tile support
A removable tile backstop that facilitates freehand cutting of oversize material
Cutting table that can be secured by a spring loaded lock to prevent loss during transport
A powerful 1-1/2 HP motor that has a patented cooling inlet that draws air away from the side opposite the cutting mist to give longest motor life, thermal overload protection, and a water pump plug receptacle
Liquid Cooled Bearing Housing (LCBH), a patented design that directs blade cooling water through the bearing housing to prevent overheating of the blade shaft bearings
Fully guarded belt driven blade shaft that is adjustable for cutting height
Removable blade guard with cooling water directed to both sides of the blade through brushes that provide even distribution of water and reduce cutting mist and a molded rubber splash guard
Steel construction with zinc plated angle rails and a powder coated frame
C-UL Listed motor and water pump
One year warranty.
The No. 1000SR also features:
A 16-1/2" x 16-1/2" extra large cutting table with a bolt-on 4" wide by 9" long extension to permit a 10" rip cut (on 20" tile) using the No. 1000-35 Guide
Scale (tile backstop) marked with 1/8" graduations to 8" on both left and right sides
Welded stainless steel water tray with a water pump retaining bracket and a chained rubber drain plug
Included items: Water pump, Wrench, Owner’s manual, No. 1000-35 45°/90° Flat Cutting Guide, No. 1000-34 45° Large Miter Guide and No. 10-CRP 10" Continuous Rim Premium Blade