Gundlach 1000JR 10" Tile Saw make the best cuts on ceramic and stone flooring.
14.5" blade makes a 20" straight cut or 14" diagonal cut. These professional 10" tile saws are designed to give the best possible cuts and productivity on tile and stone.
A large cutting table mounted on ball bearing rollers with an injection molded rubber top to reduce vibration and securely hold tile in place for accurate cuts. A rubber topped cutting table with slots molded on a 45° angle to act as diagonal cutting guides and also channel water back to the tray The last 1” of the rubber top molded solid up to the tile backstop to eliminate end-of-cut corner breaking caused by insufficient tile support. A removable tile backstop that facilitates freehand cutting of oversize material. Cutting table that can be secured by a spring loaded lock to prevent loss during transport. A powerful 1-1/2 HP motor that has a patented cooling inlet that draws air away from the side opposite the cutting mist to give longest motor life. Thermal overload protection, and a water pump plug receptacle. Liquid Cooled Bearing Housing (LCBH), a patented design that directs blade cooling water through the bearing housing to prevent overheating of the blade shaft bearings. Fully guarded belt driven blade shaft that is adjustable for cutting height. Removable blade guard with cooling water directed to both sides of the blade through brushes that provide even distribution of water and reduce cutting mist and a molded rubber splash guard. Steel construction with zinc plated angle rails and a powder coated frame. C-UL Listed motor and water pump
One year warranty.
The No. 1000JR also features:
A 14-1/2" x 14-1/2" cutting table
Scale (tile backstop) marked with 1/4" graduations to 8" on the left side and 6" on the right side
Plastic water tray has a chained rubber drain plug and a two year warranty against breakage in normal use
Included items: Water pump, Wrench, Owner’s manual, No. 1000-35 45°/90° Flat Cutting Guide, No. 700-34 45°/60° Small Miter Guide and No. 10-CRS 10" Continuous Rim Standard Blade
I didn't read this much in High School, hope that covered it all for you.