The Handi-Kirb™ Shower Curb is a stay-in-place plastic form for roll-in, wheelchair accessible shower curbs where recessing the compartment floor is not possible or practical. Handi-Kirb has molded in dovetail connecting lugs to accommodate any size shower opening and can be used with either a liquid or sheet pan liner membrane. This lower profile along with a tiled shower floor, meets the ADA requirements for a shower curb. Handi-Kirb can be used in its complete profile to give an untiled height of 2-3/8″. It can also be cut in two places along its length to give a low profile untiled height of 3/4″. Handi-Kirb is easily cut with a hacksaw, PVC cutters or angle grinder. Can be used on concrete sub floors using 1-1/2″ Tapcon® screws or wood sub floors using 1″ wood screws (Screws not included). Supplied with installation instructions. Handi-Kirb is 8″ wide x 30″ long and 2-3/8″ high.