Prefloor truck


*Not all items may qualify for free shipping

Taylor Tools 260B-HL Optimum Hybrid Bronco Battery Powered Floor Stripper

More Views

Taylor Tools 260B-HL Optimum Hybrid Bronco Battery Powered Floor Stripper

Regular Price: $39,550.00

Special Price $34,292.00

Finance this product for as little as $695.23 per month! Click here to learn more.

Taylor Tools' flagship model floor stripper, the Hybrid Optimum, operates in a hybrid battery power mode to allow twice the operating time than other battery powered strippers.

Please note that these machines are made to order and can take up to two weeks before ready for shipping, please contact us before placing order.



Taylor Tools Bronco Hybrid Optimum Floor Stripper Machine

Combining speed and power with a longer lasting battery charge, you get arguably the fastest, most efficient and cost-effective battery operated floor removal machine on the market today.


• Full Work Day Battery Service!
A new, more efficient motor uses less battery power for the same horsepower to greatly extend run-time (1 shift +) without sacrificing speed or removal rates. Run even longer when operating in hybrid/corded mode.

• Charges 50% Faster!
The OPTIMUM’s unique, new on-board charger delivers more power from the same power source to charge batteries in half the time.

• Twice The Battery Life!
Sooner or later, all battery-operated equipment requires battery replacement. With the new OPTIMUM, it’s later...much later. In fact, you’ll replace batteries only half as often as competitive strippers thanks, in part, to our exclusive Battery Control System. And the OPTIMUM’s on-board charger eliminates the need to remove batteries for safer, faster charging.

Choose your method of operation...
• Battery operated
• 110V Cord-Powered
• Battery plus Cord Power

Don’t let exaggerated run-time claims from other battery-powered strippers fool you. 

The issue isn’t how long the machine can run on a charge. The important question is: how much material can be removed in a given period of time? And, since the OPTIMUM is nearly twice as fast and powerful as competitive machines, you’ll be done with the job and headed for happy hour while the competition is still chugging along. 

The new OPTIMUM can operate for 6 to 8 hours on a fully charged battery. Or you can run the OPTIMUM as a cord-powered machine on readily available 110V current. Running the OPTIMUM as a corded machine will increase run-time by up to 50%.

On-Board Charging System
With the new OPTIMUM, you don’t have to stop and remove heavy batteries, put them in a charger, then run the risk of incorrectly reconnecting them after recharging. 

With competitive battery-operated strippers, you also run the risk of injuring your back when replacing the heavy batteries and if they’re accidentally dropped, there is a possibility of spilling hazardous battery acid. Plus, you have to keep track of your expensive spare batteries and charger on the jobsite to keep them from being stolen.

On the other hand, charging the OPTIMUM is a fast, simple and safe procedure with the unique on-board charging system. Just plug the supplied extension cord into any 110 volt 15-20 amp outlet and plug the other end into the male panel plug on the OPTIMUM. With the on-board charger, you can charge the battery anytime: during operation or after the battery has run down. Or you can easily charge the battery overnight. A completely depleted battery requires 6-12 hours to fully recharge.

The on-board charger is a “smart” charger. It brings all batteries up to full charge and conditions them automatically and there is no need to turn off the charger after charging.

The battery system will provide years of reliable service. The batteries are zero maintenance and do not have a memory so a partial charge will not reduce battery life.

Maximizing Operating Time
If you are running strictly on battery power and energy depletion begins to make it difficult to remove substrate, you can plug the machine in for an hour or so (without operation) and get additional run-time. A wise procedure is to plug the machine in while on break, changing blades or any other convenient downtime situations.

For continuous operation on a multi-shift removal job, start with a fully charged battery and also plug into a 110V outlet during operation.

On-site training at your jobsite or facility is required.

Stripper Specifications
Length* 56"
Width 29"
Height* 53"
Weight w/o Supplemental Weight N/A
Wt. of Supplemental Wt. N/A
Shipping wt. 2050#
Motor Specs. 48 volt
DC motor
3600 rpm 
Blade Action Fixed Blade
Blade Stroke Fixed Blade
Warranty 1 yr.
* Length and height dimensions are with handle bar extended 
Stripper specifications are approximate





**Please note that this machine must be shipped to a commercial address or additional charges may incur.

Additional Information

Additional Information

Manufacturer Taylor
Product Type Rip Up Tools